manikanta hotel: 2010

Friday, December 17, 2010

for only lovers

a love message frm my blog

dediceted to lovers

click here to download

Ingredients:

1/2 pound Raisins (Kishmish)

1/2 pound chopped Dates (Khajoor)

2 tblsp blanched, slivered almonds

2 cups chopped Suet

1 1/4 cups Fine Wheat Flour (Maida)

1 tsp Salt

1/4 tsp ground Cloves (Lavang)

1/2 tsp Allspice

1/2 tsp Cinnamon (Tuj/Dalchini)

1/2 tsp grated Nutmeg Powder(Jaiphal)

1/2 cup Brown Sugar

1 peeled and grated Apple

6 eggs

1 Orange Juice

1 Lemon Juice

1/2 cup Buttermilk

3 cups fresh White Bread Crumbs

1/2 cup Brandy

1 pound Sultanas

1 pound Currants

How to make christmas pudding:

Grease 1 pudding tin.

In a large bowl add dried fruits, almonds and suet ..

Dredge with 1/4 cup of flour..

Lightly sift the remaining flour and spices..

Add it to mixture with sugar and grated apple and mix well.

Beat eggs until light and frothy.

Add citrus juices, buttermilk and mix it to the pudding mixture.

Alos mix in bread crumbs.

Now fill the moulds 3/4 th with this mixture and boil for 6 hours.

Keep refilling the water while puddings are boiling.

When fully boiled let them cool off.

Cover them and store them in refrigerator.

Before serving steam again for 1 hour and serev with sauce.

COFFEE PUDDING RECIPE

Ingredients:

5 ozl strong coffee

5 oz sugar

4 eggs

1 pint milk

small pinch of salt

How to make coffee pudding:

Boil the milk and leave it to cool a little.

Beat the eggs and sugar together and add the milk and salt, then the coffee.

Strain the mixture into a pie dish, stand in a tin with boiling water half way up the dish and cook in a moderate oven until quite firm.

Leave to cool and when cold sprinkle with castor sugar.

CHOCOLATE CHERRY CAKE RECIPE

Ingredients:

6 Eggs White

1 Chocolate Cake Mix

21 oz Cherry Pie Mix

For Frosting:

2 Eggs White

1 1/2 cup Sugar

1/4 tsp Cream of Tartar

1/3 cup Water

1 tsp Vanilla Essence

How to make chocolate cherry cake:

In a bowl mix egg whites, chocolate cake mix, cherry pie filling.

Grease 9" X 13" pan and make a layer of flour on it.

Pour the batter into the pan.

In a preheated oven bake the pan for 35 - 40 minutes ot till the toothpick comes out clean.

Take tthe cake out and cool it.

To make the frosting, mix all the frosting ingredients and pour in a double boiler and with a beater, beat for 1 minute.

Then place this boiler on boiling water and again beat for 7 minutes.

Remove from heat and beat for 2 minutes on high speed.

Frost the cool cake with this mixture.

Tuesday, December 7, 2010

christmas recipes - Chocolate Nuggets

Ingredients

1/2 cup (125 mL) vegetable oil
4 squares (1 oz./28 g each) unsweetened chocolate
2 cups (500 mL) sugar
4 eggs
2 tsp. (10 mL) vanilla
2 cups (500 mL) all purpose flour
2 tsp. (10 mL) baking powder
1 cup (250 mL) coarse sugar for rolling (or additional granulated sugar)

Cooking Instructions

In a small saucepan, heat oil and chocolate over low heat, stirring until the chocolate is melted and the mixture is smooth. Transfer to a mixing bowl. Add sugar, eggs and vanilla and beat with an electric mixer until smooth and well blended. Mix in flour and baking powder and beat just until the flour is incorporated into the dough. Chill in the refrigerator for at several hours or overnight.

Preheat oven to 350 degrees F (180 degrees F). Line a cookie sheet with parchment paper and lightly grease the paper. Place the coarse sugar in a flat bowl or pie plate. By hand, form the dough into 1-inch (2-cm) balls and roll in the sugar until completely coated. Place on prepared cookie sheet, at least 1-1/2 inches (4 cm) apart. Bake for 10 to 12 minutes, until the cookies are puffed and sparkly, but still slightly soft in the center. Remove to a rack to cool.

christmas recipes-Candy Cane Cookies

Ingredients1 cup margarine

1/2 cup sugar
1/2 cup powdered sugar
1 egg
1 teaspoon vanilla extract
1/2 teaspoon peppermint extract
2-1/2 cups all-purpose flour
1/2 teaspoon salt
1/2 teaspoon red food coloring
1/2 cup peppermint candy canes, crushed
1/2 cup white sugar for decoration

Cooking Instructions

In a large bowl, cream together the margarine, sugar and powdered sugar. Beat in the egg, vanilla and peppermint extracts. Combine the flour and salt; stir into the creamed mixture until well blended. Cover or wrap dough and chill for at least one hour.

Preheat the oven to 375 degrees F (190 degrees C). Grease cookie sheets. Divide dough into halves. Color one half red by mixing in the food color. Roll a small amount of each dough into a 2-inch-long worm. Roll them together in a twisted rope and curve the end like a cane. Place onto prepared cookie sheets.

Bake for 8 to 10 minutes in the preheated oven. In a small bowl, mix together the crushed candy cane and remaining sugar. Roll hot cookies in the sugar mixture

Friday, November 5, 2010

happy diwali

Monday, November 1, 2010

8 People Can Use The Same Msn Dial Up Account

8 People Can Use The Same Msn Dial Up Account

its easy really. want to have an entire family on dial-up with just one bill?

step one. purchase 20 dollar a month subscription to MSN unlimited access dial up. This will include an MSN 9 cd which you will need. With the software installed, fill up your secondary account slots with new users. Make sure you pick @msn if it gives you the choice, hotmail email addresses will not work..

say the secondary account is johnsmith@msn.com type in the Dial up connection

USER : MSN/johnsmith

PASS: ******* (whatever)

connect to your local msn phone number and the other people you gave secondary accounts to will be able to do the same, while you are connected. Its a sweet deal considering everyone is paying about 2 bucks a month for internet access, especially if you cannot get broadband. if you wanted to sell off the access to people you could actually make money doing this.. but i do not suggest it.

I used to be an msn tech and this was a little known secret even to most of the employees.

After you do this you do not need the software any more. I would suggest keeping it on to micromanage everyone else's accounts. and for the simple fact that if they don't pitch in, cut them off HEHEHE

i'm on broadband now so i dont care if i tell you my little secret. anyone else knew of this?

Quick Shutdown for XP, How to create a shutdown shortcut.

Ever want a quicker way to shutdown XP without navigating through the start menu, or using a third party shutdown utility Here is a script that will do just that.

Right click the desktop and choose New Shortcut. Copy and paste this script or type it in.

%windir%System32shutdown.exe -s -t 0

Choose Next and name it whatever you like. I name mine OFF. Click Finished. Right click and choose properties and pick a Icon for it if you'd like. I use a wall light switch Icon. I drag mine into my QuickLaunch toolbar for one click shutdown.

Enjoy!

creating you're very own FTP.

This is a full tutorial for creating you're very own FTP.

The first thing to do is to go to

Code:

www.no-ip.com

Register free at the page. (follow all the instructions you get there)

Look at the top, and you see the Host Search. Write the name you want, and press Go! Then download the program called No-IP on the site, or use this:

Code:

http://download.com.com/3000-2165-10055182.html?legacy=cnet

Download and install the software, then write you're registerd username and password in the requested fields. A smiley face should now appear in the program box. Press the box next to it, and I will change to a happy face. Press it again, and you have you're ip guided to you're registerd host name. You have to press the smiley every time you log on to the internet. If you are connected all the time, you whont have to do it again, but try to make sure. It will tell you if you are guided to you're host name or not.

That was the basics. Now it's time for getting this thing online.

Got to

Code:

www.bpftpserver.com

(it's a pay prog. you can crack it or buy it)

Download Bullet Proof FTP Server, and install it. Start the program, and you will see a big white screen, and some icons on the top.

Press the lightning, and it will say: (example)

31.07.02 10:41:22 - FTP Server On-line : IP(s) 192.168.1.10,80.212.4.10, on port 21

Then you press the human head (nr. 6 from the right)

Make an account for you're self, and press ok. Minimize the program, and go to the internet again. Go to

Code:

www.smartftp.com

and download the prog (I'm sure the most of you have an FTP prog from before. Write the host name you made at NoIP, and the login pass and port. (Default is port 21.) Press connect, and you are online. I did not get into all details, but you can learn more about the progs in the help section.

HOW TO GET ANY WINDOWS PASSWORD

HOW TO GET ANY WINDOWS PASSWORD

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)

LC4 or LC5 (lophtcrack)( must be full version)

NTFSPro (doesn't matter if demo)

any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

How To Remove and Add Right-Click Menu Items from Files and Folders

How To Remove and Add Right-Click Menu Items from Files and Folders

Removing Items

A lot of programs you install will add themselves to the right-click menu of your files and/or folders. And most times, you have no choice in the matter and, as a result, your right-click menu can get very long with added items you don't even use. The last person I was helping with this had a right context menu so long that the Rename option was no longer visible!

Fortunately, you can easily remove those unwanted menu items, if you know the registry values to edit. And it's not at all difficult once you know the keys responsible for the additions.

For Files, the secret lies in the "context menu handlers" under the shellex subkey for "All Files" which, in the registry, is nothing but an asterisk - like a dos wildcard, which means the values entered apply to all files. It is at the very top of the Root key, right here:

HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers

Click the the + sign next to the ContextMenuHandlers key, to expand it.

Now you will see some of the programs that have added items to your right-click menu. Simply delete the program keys you don't want.

Yup! It's that simple. If deleting makes you uneasy, just export the key before deleting it. Or, instead of deleting the values, disable them. Simply double click the default value for the program on the right hand pane and rename the clsid value by placing a period or dash in front of it.

ie; - {b5eedee0-c06e-11cf-8c56-444553540000}

Then exit the registry, refresh, and right click a file to see if the item was removed from the menu.

Some programs - like WinZip or WinRar - will add several items to your right click menu but all of them will be removed by deleting or disabling their one context menu handler.

Note that the above key only applies to the right click menu of files.

To remove entries from the right click context menu of folders, you need to navigate to the Folder and Drive keys:

HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers

HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers

All you have to do is follow the same procedure as for Files - either disable or delete items you wish to remove.

Adding Items

Adding Items to the right click menu of Files and Folders is also fairly simple using the Registry. It just involves the creation of a few new keys for each item you wish to add. You edit the same keys used for removing items. Let's use Notepad as an example of an item you'd like to add to the right click menu of all your files or folders.

For folders, go to this key:

HKEY_CLASSES_ROOT\Folder

Click the + sign next to Folder and expand it so that the Shell key is visible. Right click the Shell key and choose New>Key and name the key Notepad or whatever else you'd prefer (whatever the key is named is what will appear in the right-click menu). Now right click the new key you made and create another key named Command. Then, in the right hand pane, double click "Default" and enter Notepad.exe as the value.

Exit the registry, refresh, and right click any folder. Notepad should now be on the context menu.

For files, go here again:

HKEY_CLASSES_ROOT\*

Expand the * key and see if a Shell key exists. If it does exist, follow the same procedure as for folders. If it does not exist, you'll have to create a new Shell first. Just right click the * key and choose New>Key and name it Shell. Then right click the Shell key and continue on the same way you did for adding items to the right click menu of folders.

Once done, Notepad should appear as an option in the right click menu of all your files.

How to change the serial number used in Windows XP, Valid for XP Corporate

Step 1

Open Start/Run... and type the command:

regedit and click "OK" (or press ENTER).

Go to HKey_Local_Machine\Software\Microsoft\WindowsNT\Current Version\WPAEvents,

on the right double click on "oobetimer" and change at least one digit of this value to deactivate windows.

Click "OK" and close the Registry Editor.

Step 2

Open Start/Run... and type the command:

%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

This will bring up the "Activate Windows" window.

Check the option for "Yes, I want to telephone a customer service representative to activate Windows" and click "Next"

Step 3

Then click "Change Product Key" (don't enter any information on that screen)

Step 4

Type in the new key and click "Update"

The activate Windows by phone window will reappear at this point, just close it by clicking the X in the upper right hand corner

Step 5

Reboot your system and Open Start/Run... and type the command:

%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

If you see "Windows is already activated" then everything is OK.

Best Keyboard Shortcuts

Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:

Windows key + R = Run menu

This is usually followed by:

cmd = Command Prompt

iexplore + "web address" = Internet Explorer

compmgmt.msc = Computer Management

dhcpmgmt.msc = DHCP Management

dnsmgmt.msc = DNS Management

services.msc = Services

eventvwr = Event Viewer

dsa.msc = Active Directory Users and Computers

dssite.msc = Active Directory Sites and Services

Windows key + E = Explorer

ALT + Tab = Switch between windows

ALT, Space, X = Maximize window

CTRL + Shift + Esc = Task Manager

Windows key + Break = System properties

Windows key + F = Search

Windows key + D = Hide/Display all windows

CTRL + C = copy

CTRL + X = cut

CTRL + V = paste

Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.

Keyboard Shortcuts

[Alt] and [Esc] Switch between running applications

[Alt] and letter Select menu item by underlined letter

[Ctrl] and [Esc] Open Program Menu

[Ctrl] and [F4] Close active document or group windows (does not work with some applications)

[Alt] and [F4] Quit active application or close current window

[Alt] and [-] Open Control menu for active document

Ctrl] Lft., Rt. arrow Move cursor forward or back one word

Ctrl] Up, Down arrow Move cursor forward or back one paragraph

[F1] Open Help for active application

Windows+M Minimize all open windows

Shift+Windows+M Undo minimize all open windows

Windows+F1 Open Windows Help

Windows+Tab Cycle through the Taskbar buttons

Windows+Break Open the System Properties dialog box

acessability shortcuts

Right SHIFT for eight seconds........ Switch FilterKeys on and off.

Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.

Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.

SHIFT....... five times Switch StickyKeys on and off.

NUM LOCK...... for five seconds Switch ToggleKeys on and off.

explorer shortcuts

END....... Display the bottom of the active window.

HOME....... Display the top of the active window.

NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.

NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.

NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.

LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.

RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.

Type the following commands in your Run Box (Windows Key + R) or Start Run

devmgmt.msc = Device Manager

msinfo32 = System Information

cleanmgr = Disk Cleanup

ntbackup = Backup or Restore Wizard (Windows Backup Utility)

mmc = Microsoft Management Console

excel = Microsoft Excel (If Installed)

msaccess = Microsoft Access (If Installed)

powerpnt = Microsoft PowerPoint (If Installed)

winword = Microsoft Word (If Installed)

frontpg = Microsoft FrontPage (If Installed)

notepad = Notepad

wordpad = WordPad

calc = Calculator

msmsgs = Windows Messenger

mspaint = Microsoft Paint

wmplayer = Windows Media Player

rstrui = System Restore

netscp6 = Netscape 6.x

netscp = Netscape 7.x

netscape = Netscape 4.x

waol = America Online

control = Opens the Control Panel

control printers = Opens the Printers Dialog

internetbrowser

type in u're adress "google", then press [Right CTRL] and [Enter]

add www. and .com to word and go to it

For Windows XP:

Copy. CTRL+C

Cut. CTRL+X

Paste. CTRL+V

Undo. CTRL+Z

Delete. DELETE

Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE

Copy selected item. CTRL while dragging an item

Create shortcut to selected item. CTRL+SHIFT while dragging an item

Rename selected item. F2

Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW

Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW

Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW

Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW

Highlight a block of text. CTRL+SHIFT with any of the arrow keys

Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys

Select all. CTRL+A

Search for a file or folder. F3

View properties for the selected item. ALT+ENTER

Close the active item, or quit the active program. ALT+F4

Opens the shortcut menu for the active window. ALT+SPACEBAR

Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4

Switch between open items. ALT+TAB

Cycle through items in the order they were opened. ALT+ESC

Cycle through screen elements in a window or on the desktop. F6

Display the Address bar list in My Computer or Windows Explorer. F4

Display the shortcut menu for the selected item. SHIFT+F10

Display the System menu for the active window. ALT+SPACEBAR

Display the Start menu. CTRL+ESC

Display the corresponding menu. ALT+Underlined letter in a menu name

Carry out the corresponding command. Underlined letter in a command name on an open menu

Activate the menu bar in the active program. F10

Open the next menu to the right, or open a submenu. RIGHT ARROW

Open the next menu to the left, or close a submenu. LEFT ARROW

Refresh the active window. F5

View the folder one level up in My Computer or Windows Explorer. BACKSPACE

Cancel the current task. ESC

SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.

Use these keyboard shortcuts for dialog boxes:

To Press

Move forward through tabs. CTRL+TAB

Move backward through tabs. CTRL+SHIFT+TAB

Move forward through options. TAB

Move backward through options. SHIFT+TAB

Carry out the corresponding command or select the corresponding option. ALT+Underlined letter

Carry out the command for the active option or button. ENTER

Select or clear the check box if the active option is a check box. SPACEBAR

Select a button if the active option is a group of option buttons. Arrow keys

Display Help. F1

Display the items in the active list. F4

Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:

Display or hide the Start menu. WIN Key

Display the System Properties dialog box. WIN Key+BREAK

Show the desktop. WIN Key+D

Minimize all windows. WIN Key+M

Restores minimized windows. WIN Key+Shift+M

Open My Computer. WIN Key+E

Search for a file or folder. WIN Key+F

Search for computers. CTRL+WIN Key+F

Display Windows Help. WIN Key+F1

Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L

Open the Run dialog box. WIN Key+R

Open Utility Manager. WIN Key+U

accessibility keyboard shortcuts:

Switch FilterKeys on and off. Right SHIFT for eight seconds

Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN

Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK

Switch StickyKeys on and off. SHIFT five times

Switch ToggleKeys on and off. NUM LOCK for five seconds

Open Utility Manager. WIN Key+U

shortcuts you can use with Windows Explorer:

Display the bottom of the active window. END

Display the top of the active window. HOME

Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)

Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)

Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)

Collapse current selection if it's expanded, or select parent folder. LEFT ARROW

Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW

23 Ways To Speed WinXP, Not only Defrag

Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.

1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.

2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.

3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.

4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.

The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.

Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.

6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.

7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.

8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.

10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.

12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.

14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.

15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.

16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.

18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.

20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.

22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.

23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.

Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.

Hide Drives and Partitions

Hide Drives and Partitions

Do you have data on a partition or hard drive that you don't want tampered with or easily accessible to other users? Well, you can hide any drive/partition in Windows XP, NT, and 2000. That means that they won't show up in Explorer or My Computer.

If you want access to that drive from your user account you should create a desktop shortcut before proceeding. Once hidden, you can still access by typing the drive letter and a colon in Start/Run—for example, "D:" will bring up a folder of the contents on your D drive.

The easiest way with Win XP is to use the TweakUI power toy from Mcft. Go to Start/Run and type in "tweakui" (without the quotes).

Go to My Computer/Drives and uncheck the drive/partition(s) you want hidden. Click "Apply" or "OK" when finished.

If you have XP but not Tweak UI you can download it here...

http://www.Mcft.com/windowsxp/downloads/powertoys/xppowertoys.mspx

For Win NT, 2000, and XP you can use the following Registry edit:

*Be sure to back up the Registry before proceeding

http://www.worldstart.com/tips/tips.php/401

Open the Registry Editor by going to Start/Run and typing in "regedit" (without the quotes). Find your way to...

HKEY_CURRENT_USER\Software\Mcft\Windows\CurrentVersion\Policies

Click on "Explorer".

Double-click the "NoDrives" key in the right column. If you don't find a "NoDrives" registry key, just right-click in the right pane and choose "New/DWORD Value" then name the key "NoDrives".

You'll see a value like "0000 00 00 00 00". This is where the fun starts. The four sets of double zeros (after the "0000") are where you'll enter the values for the drive/partitions. Now, stay with me on this—it's not as complicated as it sounds:

The first column is for drives A-H, the second for I-P, the third for Q-X, and the fourth for Y-Z.

The values for each drive are as follows:

1 - A I Q Y

2 - B J R Z

4 - C K S

8 - D L T

16 - E M U

32 - F N V

64 - G O W

80 - H P X

So, let's say you want to hide drive D. In the first column you would put "08". For drive K you would put "04" in the second column.

But what if you want to hide more than one drive in a column? Simply add the values together: D+E = 8+16 = 24. So in the first column you would put "24".

Still baffled? If you have XP then go get TweakUI and save yourself the math.

Whichever method you use, you can rest easy knowing that the files on that drive or partition are less accessible to other users.

How To Add Your Own Windows Tips

R you sick of seeing the same tips again and again when you first logon to Windows? Now you can change them to whatever you want, whether it's quotes, jokes or a to-do list, anything is possible.

Open your registry and find the key below.

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Explorer\ Tips

Create a new string valued named by incrementing the existing value names and set it to the required tip text.

250+ Tech books online

Sunday, October 31, 2010

Indian Cooking Recipe : Dood Peda

Ingredients :
1 litre milk
¾ cup sugar
4 cardamom pods
Ghee for greasing thali

Method :
Heat milk on medium flame and allow it to boil.
Then stir constantly till it becomes semi-solid or khova is formed.
Mix sugar. Lower the flame.
Continue stirring till the mixture thickens and leaves the sides of the vessel.
Drop a sample of the mixture on a plate, and press between finger and thumb, when cool.
If it does not stick, remove from flame. Add cardamom powder.
Mix well. Take small part on the palm and shape into round balls.
Flatten a bit. Lay them on a plate smeared with ghee.
Store in a container, when cool.

me and my friends

don in the class

me and my collage friends

Diwali Recipe : Coffee Fizz Recipe

Ingredients:

1 1/2 cup milk
4 tbsp. filter coffee decoction or 2 tsp. instant coffee
3 tsp. sugar ground
4 tsp. hot water (if using instant coffee)
2 scoops vanilla ice-cream
1/4 tsp vanilla essence

Method :

Beat together sugar, coffee and hot water.
When it gets foamy, add milk.
Mix and keep in refrigerator till required and quite chilled.
Before serving, add vanilla essence, beat till frothy with an electric whopper or egg beater.
Pour coffee in two glasses from
Put vanilla ice-cream in to glass (one in each)
Serve cold

manikanta hotel

live tv

flash message

Pages